Application
This is the optimal cost solution for single-well meterings on brownfields with low production rates and a stable ratio of borehole fluid phases. Operating principal is based on separating of fluid flow by hydrocyclone separator.
The unit is fully standalone that enables to test wells without an operator. Metering data are kept in history with option of data base communications by GSM. Distinction of the unit is item calibration of the meters that significantly simplifies calibration process.
Advantages
- Ground placement possibility without additional construction
- Reduction of the metering time due to the small volume of the separator
- Simplicity and minimum number of equipment
- Potential of water cut calculation by three methods
- Low-power generator or alternative energy sources (from 1kwh)
- Delivery by helicopter or low-toned vehicles
- Mobile design for using as testing meter unit
- Preparation for mobilization and movement of the metering unit takes 60 minutes
- Careful equipment part selection
Specification
| Specifications | Design 1 | Design 2 |
|---|---|---|
| Line pressure | up to 63 bar | up to 63 bar |
| Max liquid flow rate capacity, t/day | 160 | 320 |
| Max gas flow rate capacity, n. m3/day | 20000 | 40000 |
| Gas-oil ratio, n. m3/day | 125 | 125 |
| Water cut | 0% to 100% | 0% to 100% |
| Line temperature | +5°С to + 70°С | +5°С to + 70°С |
| Ambient temperature | -60°С to +45°С | -60°С to +45°С |
| Тип взрывозащиты | Exd | Exd |
| Explosion-proof version | Exd | Exd |
| Overall dimensions (LхWхH), m | 1,8×1,5×2,4 | 2,lх1,5×2,6 |
| Net weight, kg | 2000 | 2500 |
Contacts
Tel.: +7 (495) 952-41-24, ext. 1605
E-mail: export@ozna.ru